Configuring Osd Settings - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
The Video Standard is configurable.
This function varies depending on the models of positioning system.
 Capture Mode:
You can set the Capture Mode to OFF and 384*288@25fps.
 Digital Zoom
The digital zoom is available for the thermal sensor, there are x2 and X4 selectable.
This function varies depending on the models of positioning system.
 Other
 Local Output
You can enable or disable the video output through the BNC interface on your
demand.

6.5.2 Configuring OSD Settings

Purpose:
The positioning system supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of positioning system.
You can customize the on screen display of time.
Steps:
1. Enter the OSD Settings interface:
Configuration > Advanced Configuration > Image > OSD Settings
© Hikvision
77