Appendix 2 Port Mapping - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system

Appendix 2 Port Mapping

The following settings are for TP-LINK router (TL-R410). The settings vary depending
on different models of routers.
Steps:
1. Select the WAN Connection Type, as shown below:
2. Set the LAN parameters of the router as in the following figure, including IP
address and subnet mask settings.
3. Set the port mapping in the virtual severs of Forwarding. You need to forward
ports 80, 8000, 8200~8210 and 554 for a positioning system.
 You can change 80, 8000 and 554 ports value in the positioning system with web browser
or client software.
 In the positioning system, the 8200~8210 ports change with the 8000 port with a
constant value of 200. E.g. if the 8000 port is changed to 8005, then the 8200~8210 ports
should be changed to 8205~8215.
© Hikvision
Figure A.2.1 Select the WAN Connection Type
Figure A.2.2 Set the LAN parameters
132