Functions - HIKVISION Positioning System User Manual

9
User Manual of Thermometric Bi-spectrum Network Positioning system

1.3 Functions

The functions vary depending on the models of positioning system.
 Bi-spectrum
The positioning system has two lens, an optical one and a thermal one, and two
images are respectively provided by each lens.
 PTZ Limits
The positioning system can be programmed to move within the PTZ stops (left/right,
up/down).
 Scan Modes
The positioning system provides 5 scan modes: auto scan, tilt scan, frame scan,
random scan and panorama scan.
 Presets
A preset is a predefined image position. When the preset is called, the positioning
system will automatically move to the defined position. The presets can be added,
modified, deleted and called.
 Label Display
The on-screen label of the preset title, azimuth/elevation, zoom, time and
positioning system name can be displayed on the monitor. The displays of time and
positioning system name can be programmed.
 Auto Flips
In manual tracking mode, when a target object goes directly beneath the positioning
system, the video will automatically flips 180 degrees in horizontal direction to
maintain continuity of tracking. This function can also be realized by auto mirror
image depending on different camera models.
 Privacy Mask
This function allows you to block or mask certain area of a scene, for preventing the
personal privacy from recording or live viewing. A masked area will move with pan
and tilt functions and automatically adjust in size as the lens zooms telephoto and
wide.
 3D Positioning
In the client software, use the left key of mouse to click on the desired position in the
video image and drag a rectangle area in the lower right direction, then the
positioning system system will move the position to the center and allow the
rectangle area to zoom in. Use the left key of mouse to drag a rectangle area in the
upper left direction to move the position to the center and allow the rectangle area
to zoom out.
 Proportional Pan/Tilt
Proportional pan/tilt automatically reduces or increases the pan and tilt speeds
according to the amount of zoom. At telephoto zoom settings, the pan and tilt
speeds will be slower than at wide zoom settings. This keeps the image from moving
© Hikvision