Configuring Park Actions - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
Call/delete an Initial Position:

You can click
initial position and restore the factory default initial position.

5.4 Configuring Park Actions

Purpose:
This feature allows the positioning system to start a predefined park action (scan,
preset, pattern and etc.) automatically after a period of inactivity (park time).
Scheduled Tasks function is prior to Park Action function. When these two
functions are set at the same time, only the Scheduled Tasks function takes
effect.
Steps:
1. Enter the Park Action Settings interface:
Configuration > Advanced Configuration> PTZ > Park Action
2. Check the checkbox of Enable Park Action.
3. Set the Park Time as the inactivity time of the positioning system before it starts
the park actions.
4. Choose Action Type the from the drop-down list.
© Hikvision
to call the initial position. You can click
Figure 5-4 Set the Park Action
Figure 5-5 Action Types
40
to delete the