Table of Contents
Advertisement
User Manual of Thermometric Bi-spectrum Network Positioning system
Chapter 7 VCA Configuration
Purpose:
You can do intelligent analysis, such as behavior analysis, with the positioning system.
Multiple rules can be configured for different requirements.
The VCA function only supported by the thermal channel.
7.1 VCA Resource Configuration
Purpose:
Before using the VCA function of the camera, you should select the VCA resource
type first. To use Temperature Measurement and Behavior Analysis, select
Temperature Measurement and Behavior Analysis. To use Dynamic Fire Source
Detection function, select Dynamic Fire Source Detection. To use Ship Detection
function, select Ship Detection.
Steps:
1. Enter the VCA Resource Type interface:
Configuration > Advanced Configuration > System > VCA Resource Type
2. Check the checkbox to enable the VCA resource type.
3. The system reboots and the selected VCA resource will be enabled.
Once you select any of the resources, the other VCA rules cannot be enabled.
7.2 Configuring VCA Information
Steps:
1. Enter the VCA Information Configuration interface:
Configuration > VCA Configuration > VCA Info.
© Hikvision
Figure 7-1
VCA Information
96
Advertisement
Table of Contents
