Configuring Security Service Settings; Viewing Device Information - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system

11.5 Configuring Security Service Settings

Steps:
1. Enter the Security Service interface:
Configuration> Advanced Configuration> Security > Security Service
2. Check the checkbox to enable the corresponding function.
Enable Telnet: Telnet is a network protocol used on the Internet or local area
networks to provide a bidirectional interactive text-oriented communication
facility using a virtual terminal connection.
Enable SSH: Enabling SSH (Secure Shell) function is to encrypt and compress the
data and to reduce the transmission time.

11.6 Viewing Device Information

Enter the Device Information interface:
Configuration > Basic Configuration> System > Device Information
Or Configuration > Advanced Configuration> System > Device Information
In the Device Information interface, you can edit the Device Name.
Other information of the network positioning system, such as Model, Serial No.,
Firmware Version, Encoding Version, Number of Channels, Number of HDDs, Number
of Alarm Input and Number of Alarm Output are displayed. The information cannot
be changed in this menu. It is the reference for maintenance or modification in
future.
© Hikvision
Figure 11-8 Security Service
125