User Manual of Thermometric Bi-spectrum Network Positioning system
the Min. size filter.
3) Click the
the Max. size filter.
4. Configure the rule area:
Click
line by clicking the mouse on the live view image, and then specify the other
one.
5. Click the dropdown menu in the rule list to select the crossing direction.
6. Enable rules: Check the Enable checkbox of each rule in the rule list to enable
the rule.
7. Click
7.5.2
Intrusion
Purpose:
This function can be used for detecting whether there are people, vehicles and
objects intrude into the pre-defined region longer than the set duration. The alarm
will be triggered if the rule is broken.
© Hikvision
button and draw a rectangle on the live view image as
on the tool bar of the live view panel. Specify a point of the
Figure 7-11
Draw Line
to save the settings.
104