Configuring Alarm Output - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
8. Click

6.6.4 Configuring Alarm Output

Steps:
1. Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2. Select one alarm output channel in the Alarm Output drop-down list.
3. Set a name in
alarm output (optional).
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output
remains in effect after alarm occurs.
5. Click
configuration is the same as the settings of the arming schedule for motion
detection. Refer to Step 2 in Section 6.6.1 Configuring Motion Detection.
© Hikvision
to save the settings.
Figure 6-52 Linkage Method
to enter the Edit Schedule Time interface. The time schedule
87
for the