55
User Manual of Thermometric Bi-spectrum Network Positioning system
6.3.5 Configuring SNMP Settings
Purpose:
You can use SNMP to get positioning system status and parameters related
information.
Before you start:
Before setting the SNMP, please use the SNMP software and manage to receive the
positioning system information via SNMP port. By setting the Trap Address, the
positioning system can send the alarm event and exception messages to the
surveillance center.
The SNMP version you select should be the same as that of the SNMP software.
Steps:
1. Enter the SNMP Settings interface:
Configuration > Advanced Configuration > Network > SNMP
Figure 6-15 SNMP Settings
© Hikvision