Configuring Scheduled Tasks - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
List area; set the value of Active Zoom Ratio on your demand, and then the
mask will only appear when the zoom ratio is greater than the predefined value.
6. You can also define the color of the masks.
7. You can select a mask and click
8. Check the checkbox of Enable Privacy Mask to enable this function.
You are allowed to draw up to 24 areas on the same image.

5.6 Configuring Scheduled Tasks

Purpose:
You can configure the network positioning system to perform a certain action
automatically in a user-defined time period.
Steps:
1. Enter the Scheduled Task Settings interface:
Configuration> Advanced Configuration> PTZ > Scheduled Tasks
2. Check the checkbox of Enable Scheduled Task.
3. Set the Park Time. You can set the park time (a period of inactivity) before the
© Hikvision
Figure 5-7 Define Mask Color
Figure 5-8 Configure Scheduled Tasks
to delete it from the list.
42