Setting / Calling A Preset - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system

4.5.2 Setting / Calling a Preset

Purpose:
A preset is a predefined image position. For the defined preset, you can click the
calling button to quickly view the desired image position.
 Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
Pan the positioning system to the right or left.

Tilt the positioning system up or down.

Zoom in or out.

Refocus the lens.

3. Click to finish the setting of the current preset.
4. You can click
You can configure up to 300 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
preset.
© Hikvision
Figure 4-5 Setting a Preset
to delete the preset.
31
to call the