Configuring Https Settings - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
 Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be
configured.
Receiver: The name of the user to be notified.
Receiver's Address: The email address of user to be notified.
You can click
required parameters are configured.
3. Click

6.3.12 Configuring HTTPS Settings

Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the
following steps to set the port number of https.
Example:
If you set the port number as 443 and the IP address is 192.168.1.64, you may access
the device by inputting https:// 192.168.1.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface.
Configuration > Advanced Configuration > Network > HTTPS
2. Create the self-signed certificate or authorized certificate.
© Hikvision
to check whether the setting is invalid after the
to save the settings.
Figure 6-25 HTTPS Settings
63