User Manual of Thermometric Bi-spectrum Network Positioning system
The Focus Mode can be set to Auto, Manual, Semi-auto.
Auto:
The positioning system focuses automatically at any time according to objects in
the scene.
Semi-auto:
The positioning system focuses automatically only once after panning, tilting and
zooming.
Manual:
In Manual mode, you need to use
manually.
Min. Focus Distance
This function is used to limit the minimum focus distance.
The minimum focus value varies depending on the models of positioning system.
Day/Night Switch
The IR light related function introduced below is supported by IR positioning
systems only.
Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day, Night, and Scheduled.
Auto:
In Auto mode, the day mode and night mode can switch automatically
according to the light condition of environment. The switching sensitivity can
be set to 1-3.
Day:
In Day mode, the positioning system displays color image. It is used for normal
lighting conditions.
Night:
In Night mode, the image is black and white. Night mode can increase the
sensitivity in low light conditions.
Schedule:
In Schedule mode, you can set the time schedule for day mode as shown in
Figure 6-37. The rest time out of the schedule is for night mode.
This function varies depending on the models of positioning system.
© Hikvision
Figure 6-36 Auto Mode Sensitivity
on the control panel to focus
71