Detecting Ship - HIKVISION Positioning System User Manual

User Manual of Thermometric Bi-spectrum Network Positioning system
4. Check the checkbox of Display Fire Source Frame on Stream to display a red
frame around the fire source on stream when fire occurs. (Optional)
5. Check the checkbox to select the linkage method taken for the alarm input. Refer
to Step 3 in Section 6.6.1 Configuring Motion Detection. In the field of Other
Linkage, you can check the checkbox to enable the alarm output (The alarm
output number varies depending on device ability).
6. Click

6.6.8 Detecting Ship

Purpose:
When you enable this function and ship is detected, the alarm actions will be
triggered.
Steps:
1. Enter Configuration>Advanced Configuration>System>VCA Resource Type to
select Ship Detection as VCA Resource Type.
2. Enter the ship detection interface:
Configuration > Advanced Configuration > Smart Event > Ship Detection
3. Check the checkbox of Enable Ship Detection to enable the ship detection
function.
4. Check the checkbox of Display Detection Frame on Video to display the frame
and alarm line on stream. (Optional)
The function of ship detection is only supported for some models.
5. Enter the device height in the textbox as the height of device above the water
level.
6. Draw the ship detection area and the alarm lines.
(1) Click Draw Area. Click the mouse on the live video image to draw a ship
detection area and right click to finish the drawing. The alarm will be
uploaded when ship is detected in this area.
(2) Click Draw Alarm Line. Click the mouse on the live video to draw an
alarm line and right click to finish the drawing. The device alarms and
counts the ship number when ships are detected in the area and the
ship information will be displayed on the right.
Make sure the alarm line is longer than the width of ship detection
area.
7. Check the checkbox to select the linkage method taken for the alarm input. Refer
to Step 3 in Section 6.6.1 Configuring Motion Detection. In the field of Other
© Hikvision
to save the settings.
91