HIKVISION Positioning System User Manual page 22

User Manual of Thermometric Bi-spectrum Network Positioning system
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network
positioning system. Refer to Section 6.3.4 Configuring DDNS Settings for detailed
configuration.
3. Visit the positioning system via the applied domain name.
 Private Domain Name Resolution
Network
Cable
Positioning
System
Figure 2-14 Private Domain Name Resolution
Steps:
1. Install and run the IP Server software in a computer with a static IP.
2. Access the network positioning system through the LAN with a web browser or
the client software.
3. Enable DDNS and select IP Server as the protocol type. Refer to Section 6.3.4
Configuring DDNS Settings for detailed configuration.
© Hikvision
Network
Cable
Router with Static IP
(Port Mapping)
PC + IP Server + Staic IP
Network
Cable
Internet
21
PC