Why Is The Ip Address Of Network Camera Being Changed Automatically; Why Is The Video Recorder Notifying Ip Conflict; Why Is Image Getting Stuck When Playing Back By Single Or Multi-Channel Cameras; Why Does My Video Recorder Make A Beeping Sound After Booting - HIKVISION DS-7216HGHI-K1 User Manual

Digital Video Recorder User Manual
Destination Address, and click Test to see if the network is reachable.
13.5.9 Why is the IP address of network camera being changed
automatically?
Reason
When network camera and video recorder are using the same switch but in different subnets, the
video recorder will change the IP address of network camera to the same subnet as itself.
Solution
When adding camera, click Custom Add to add camera.

13.5.10 Why is the video recorder notifying IP conflict?

Reason
The video recorder uses the same IP address as other devices.
Solution
Change the IP address of video recorder. Ensure it is not the same as other devices.
13.5.11 Why is image getting stuck when playing back by single or multi-
channel cameras?
Reason
HDD read/write exception.
Solution
Export the video, and play it with other devices. If it plays normally on other device, change your
HDD, and try again.
13.5.12 Why does my video recorder make a beeping sound after
booting?
Reason
1. The front panel is not fastened (for the device which its front panel is removable).
2. HDD error, or do not have HDD.
Solution
1. If it makes continuous beeps, and your device's front panel is removable, ensure the front
142