Table of Contents
Advertisement
6.1 3G/4G Dialing
Before you start:
Install a 3G/4G SIM card on the device.
Step 1 Go to Configuration > Network > Basic Settings > 3G/4G.
Step 2 Check Enable.
Step 3 Configure the 3G/4G VPDN (Virtual Private Dialup Network) settings. Please consult the local
operator for the network parameters of the VPDN.
10) Click Set of More Settings.
11) Select Bearing Mode.
12) Enter APN (Access Point Name), Dial Number, User Name, and Password.
13) Select Verification Protocol.
14) Click OK.
Step 4 Click OK and reboot the device to activate the new settings.
6.2 Set Wired Network
Step 1 Go to Configuration > Network > Basic Settings > TCP/IP.
Intelligent Analyzer User Manual
Chapter 6 Network
Figure 6-1 TCP/IP Settings
26
Advertisement
Table of Contents
