Emc Test Results - Danfoss VLT AutomationDrive FC 300 Design Manual

Product Introduction

3.5.2 EMC Test Results

The following test results have been obtained using an adjustable frequency drive (with options if relevant), a shielded
control cable, a control box with potentiometer, as well as a motor and motor shielded cable.
3 3
RFI filter type
Standards and
requirements
H2
FC 302
H4
FC 302
Table 3.14 EMC Test Results (Emission and Immunity)
WARNING
This type of power drive system is not intended to be used on a low-voltage public network that supplies domestic
premises. Radio frequency interference is expected if used on such a network, and supplementary mitigation measures
may be required.
48
Design Guide
EN 55011 Class B
Housing, trades
and light
industries
EN/IEC 61800-3 Category C1
First
environment
home and
office
125–1075 hp [90–800
No
kW] 380–500 V
125–1600 hp [90–1200
No
kW] 525–690 V
125–1075 hp [90–800
No
kW] 380–500 V
125–450 hp [90–315
No
kW] 525–690 V
Danfoss A/S © Rev. 2014-02-10 All rights reserved.
Conducted Emission
Class A Class A
group 1 group 2
Industrial Industrial
environment environment
Category C2 Category C3
First Second
environment environment
home and Industrial
office
No 500 ft [150 m]
No 500 ft [150 m]
500 ft [150 m] 500 ft [150 m]
100 ft [30 m] 500 ft [150 m]
Radiated Emission
Class B Class A group 1
Housing, trades Industrial
and light environment
industries
Category C1 Category C2
First environment First environment
home and office home and office
No No
No No
No Yes
No No
MG34S222