Danfoss VLT AutomationDrive FC 300 Design Manual page 67

Selection
FC 302
High/Normal load*
Typical shaft output at 400 V [kW]
Typical shaft output at 460 V [HP]
Typical shaft output at 500 V [kW]
Enclosure IP21
Enclosure IP54
Enclosure IP00
Output current
Continuous (at 400 V) [A]
Intermittent (60 s overload)
(at 400 V) [A]
Continuous (at 460/500 V) [A]
Intermittent (60 s overload)
(at 460/500 V) [A]
Continuous kVA (at 400 V) [kVA]
Continuous kVA (at 460 V) [kVA]
Continuous kVA (at 500 V) [kVA]
Maximum input current
Continuous (at 400 V) [A]
Continuous (at 460/500 V) [A]
Max. cable size, line power, motor and
2 1)2)
load share [mm (AWG)]
Max. cable size, brake [mm 2 (AWG)
3)
Max. external electrical fuses [A]
Estimated power loss at 400 V [W]
Estimated power loss at 460 V [W]
Weight, enclosure IP21, IP54 [kg]
Weight, enclosure IP00 [kg]
5)
Efficiency
Output frequency
Heatsink overtemp. trip
Control card ambient trip
* High overload=160% torque during 60 s, Normal overload=110% torque during 60 s.
Table 4.2 Technical Specifications, E-frame 380–500 V Line Power Supply 3x380–500 V AC
1) American Wire Gauge.
2) Wiring terminals on N132, N160, and P315 adjustable frequency drives cannot receive cables one size larger.
3) For fuse ratings, see chapter 7.2.1 Fuses.
4) Typical power loss is at normal conditions and expected to be within
values are based on a typical motor efficiency (IE/IE3 border line). Lower efficiency motors add to the power loss in the adjustable frequency drive.
If the switching frequency is raised from nominal, the power losses rise significantly. LCP and typical control card power consumptions are
included. Options and customer load can add up to 30 W to the losses, though usually a fully loaded control card and options for slots A and B
each add only 4 W.
5) Measured using 16.5 ft. [5 m] shielded motor cables at rated load and rated frequency.
MG34S222
Design Guide
P315
HO NO
315 355
450 500
355 400
E1
E1
E2
600 658
900 724
540 590
810 649
416 456
430 470
468 511
590 647
531 580
4x240 (4x500 mcm)
1) 2x185 (2x350 mcm)
900
4) 5) 6794 7532
4) 5) 6118 6724
270
234
Danfoss A/S © Rev. 2014-02-10 All rights reserved.
P355
HO NO
355 400
500 600
400 500
E1
E1
E2
658 745
987 820
590 678
885 746
456 516
470 540
511 587
647 733
580 667
4x240 (4x500 mcm)
2x185 (2x350 mcm)
900
7498 8677
6672 7819
272
236
0.98
0–590 Hz
230 °F [110 °C]
185 °F [85 °C]
± 15% (tolerance relates to variety in voltage and cable conditions.) These
P400
HO NO
400 450
550 600
500 530
E1
E1
E2
695 800
1043 880
678 730
1017 803
482 554
540 582
587 632
684 787
667 718
4x240 (4x500 mcm)
2x185 (2x350 mcm)
900
7976 9473
7814 8527
313
277
65
4 4