Terminal Locations - Frame Size F, 12-Pulse - Danfoss VLT AutomationDrive FC 300 Design Manual

Mechanical Installation

6.2.6 Terminal Locations - Frame Size F, 12-Pulse

The 12-Pulse F-frame enclosures have six different sizes. The F8, F10, and F12 consist of an inverter cabinet on the right and
a rectifier cabinet on the left. The F9, F11, and F13 are F8, F10, and F12 units with an additional options cabinet to the left
of the rectifier cabinet.
Terminal Locations - Inverter and Rectifier Frame Size F8 and F9
6 6
Figure 6.74 Terminal Locations - Inverter and Rectifier Cabinet - F8 and F9. Connector Plate is 1.65 in [42 mm] below .0 Level.
1 Left Side View
2 Front View
3 Right Side View
4 Ground Bar
Table 6.41 Legend to Figure 6.77
158
1
239.6 [ 9.43 ]
160.0 [ 6.30 ]
56.6 [ 2.23 ]
0.0 [ 0.00 ]
Danfoss A/S © Rev. 2014-02-10 All rights reserved.
Design Guide
2
U/T1 96 V/T2 97
R2/L12 91-1 S2/L22 92-1 T2/L32 93-1
R1/L11 91 S1/L21 92 T1/L31 93
W/T3 98
4
3
MG34S222