Process Interface; Introduction - Siemens SIMATIC Vision Sensor VS 130-2 Manual

6

Process Interface

6.1

Introduction

As an alternative to controlling from the operator panel or using the setup support,
you can also control SIMATIC VS 130-2/VS 130-2vcr from a programmable
controller. This makes it possible to train and work almost automatically.
Control over PROFIBUS DP and PROFINET IO is only possible with the VS 130-2,
control over the I/O interface "DI/DO", on the other hand, is possible with VS 130-2
and VS 130-2vcr.
Note
The automatic training and changing of codes by a programmable controller is only
possible with active setup support when in the "Options part 3/4: Security", the
check box "Take control" is not enabled for the current user.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
6-1