Reading Codes Or Checking Quality In A Profinet Environment And Outputting Over Ethernet; Mixed Operation - Siemens SIMATIC Vision Sensor VS 130-2 Manual

System Integration
2.2.5 Reading codes or checking quality in a PROFINET environment
and outputting over Ethernet
Two PCs or PGs are connected over Ethernet (TCP/IP):
•
One is used for setup.
•
The other is used to output the read codes.
Note
It is also possible to connect only one PC/PG over Ethernet (TCP/IP). In this case,
the same machine is used for setup and for code output.
A connection to a PROFINET-capable automation system remains over Ethernet.
VS 130-2/VS 130-2vcr is controlled over PROFINET by the automation system.
2.2.6

Mixed operation

In addition to the connection options listed in the sections Reading Codes or
Quality in Stand-alone Mode and over Ethernet to Reading Codes or Checking
Quality in a PROFINET Environment and Outputting over Ethernet, mixed modes
are also possible, for example control over PROFIBUS DP and result output over
RS-232.
2-6
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01