5.3.6
Evaluating
In this dialog box, you can start the processing mode. The codes are read and, if
applicable, checked to find out whether they match a trained code or whether they
contain one or more predefined strings. Depending on whether or not you use
multicode (see Options, Part 5 : Extras), you can use individual codes (if Multicode
> Use = Off) or code sets (if Multicode > Use = On).
Select code / Select code set
Here, you enter the number of a previously trained code or code set that you want
to compare with a current code. The following values are available here:
•
The numbers of all codes / code sets that have already been trained
•
"Auto", if you set the value "Read" as job in the "Job" drop-down list box in
"Options" in Part 1/5: Decoder.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-39