User Interface Of The Vs 130-2/Vs 130-2Vcr - Siemens SIMATIC Vision Sensor VS 130-2 Manual

Hide thumbs Also See for SIMATIC Vision Sensor VS 130-2:
Table of Contents

Advertisement

5.3.2

User interface of the VS 130-2/VS 130-2vcr

When you open the user interface, the page opens that corresponds to the current
operating state of the processing unit. If, for example, the processing unit is in Stop
mode, the page below opens:
Task
At the left-hand edge of the user interface, you will see the list of jobs in the form of
buttons. The appropriate job is activated depending on the previous operating state
of the processing unit. You can change between jobs using the buttons.
Traffic Light
Below the buttons, there is a traffic light with which you can see the operating state
of the processing unit at a glance. The traffic light can have the following states:
Green: Processing mode with output of the result string
Yellow: STOP including adjustment and training
Red: Fault
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic vision sensor vs 130-2vcr

Table of Contents