Siemens SIMATIC Vision Sensor VS 130-2 Manual page 167

Transport and Storage of Modules
In terms of shipping and storage conditions, the SIMATIC VS 130-2/VS 130-2vcr exceeds the
requirements of IEC 61131-2. The following information applies to modules shipped or stored in their
original packing.
The climatic conditions correspond to IEC 60721-3-3, Class 3K7 for storage and IEC 60721-3-2,
Class 2K4 for transport.
The mechanical conditions correspond to IEC 60721-3-2, Class 2M2.
Conditions
Free fall
Temperature
Atmospheric pressure
Relative humidity (at +25 °C)
Sine-shaped oscillations complying
with IEC 60068-2-6
Shock complying with
IEC 60068-2-29
Mechanical Environmental Conditions for Operation
SIMATIC VS 130-2/VS 130-2vcr is intended for stationary use in weather-protected locations.
SIMATIC VS 130-2/VS 130-2vcr complies with the conditions for use according to DIN IEC 60721-3-3:
•
Class 3M3 (mechanical requirements)
•
Class 3K3 (climatic environmental conditions)
Mechanical environmental conditions, sine-shaped oscillations
Frequency range in Hz
10 ≤ f < 58
58 ≤ f < 500
Test for mechanical environmental conditions
Test for / Test standard
Oscillations
Oscillation test complying with
IEC 60068-2-6 (sine)
Test for / Test standard
Shock Shock test
complying with
IEC 60068-2-29
Shock test
complying with
IEC 60068-2-27
Ambient climatic conditions for operation
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Permitted Range
≤ 1 m (up to 10 kg)
-30 °C to +70 ° C
1080 to 660 hPa (corresponds to a height of -1000 to 3500 m)
5 to 95 %, no condensation
5 - 9 Hz: 3,5 mm
9 -500 Hz: 9,8 m/s2
2
250 m/s , 6 ms, 1000 shocks
Test values
0,075 mm amplitude
1 g constant acceleration
Remarks
•
Type of vibration: Frequency cycles with a rate of change of 1
octave/minute.
10 Hz ≤ f < 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f < 500 Hz, constant acceleration 1 g
10 Hz ≤ f ≤ 55 Hz, amplitude 1 mm (only sensor head and lighting unit)
•
Duration of vibration: 10 frequency cycles per axis in each of the 3
perpendicular axes
Remarks
•
Type of shock: half sine
•
Strength of the shock:
Processing unit 10 g peak value / 16 ms duration
Sensor head, illumination: 10 g peak value / 16 ms duration
•
Direction of shock: 100 shocks in each of the 3 perpendicular axes
Sensor head, illumination:
•
70 g peak value / 6 ms duration 3 times in each direction
•
30 g peak value / 11 ms duration 3 times in each direction
Appendix
8-19