Siemens SIMATIC Vision Sensor VS 130-2 Manual page 89

Part 1/5: Statistics
In this part of the dialog, you can see statistical values relating to the reading of the
codes and the read quality. You will find a description of the displayed information
in the online help that you can call with the "Help" button.
If you have disabled the Multicode mode (see Part 5 of the Options dialog), you
enter information here out the currently used code.
If the Multicode mode is enabled, a drop-down list box is displayed. In the drop-
down list box, you can decide whether the statistics of the entire code set or the
statistics of a specific code is displayed.
If you simply want the statistics of the OK reads of a certain code, select the code
number of the relevant set from the drop-down list box. With this setting, the "*"
symbol is displayed at several positions.
You can clear the statistics with the "Reset statistics" button if you have
management permissions (see Options Part 3/4: Security). The statistics are reset
automatically when you change the code.
Information Part 2/5: Code(s)
In this part of the dialog, you see the exposure and properties of a trained code or
the settings of code to be read along with the image and the result string.
In "Select code", you can specify the number of the trained code whose properties
you want to display.
In the "Training Information" group box, the shutter speed, if applicable the shutter
speed offset, and the brightness with which the image was acquired during training
of the code are displayed.
The "Quality" group box displays all the quality characteristics of the trained code.
The quality is specified as a quality grade (A = best to F = worst quality) and
specified in an absolute value.
By clicking on the "Runtime >" button, you open the page displaying the settings of
a code to be read.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-45