The Lamp Multiplexer Accessory - Siemens SIMATIC Vision Sensor VS 130-2 Manual

1.6

The lamp multiplexer accessory

If there are varying lighting conditions in the vicinity of the sensor head, it is
sometimes advisable to work with different lamps at different times. You can
therefore connect up to 4 flash lamps to the Vision Sensor VS 130-2/VS 130-2vcr
using he lamp multiplexer (6GF9 002-7BA).
Note
The lamp multiplexer can only be used if you have set the multilight mode. If you
not activate the multilight mode, you must connect your lamp directly to the
processing unit.
The lamp multiplexer is shown in the figure below.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Product Overview
1-9