Siemens SIMATIC Vision Sensor VS 130-2 Manual page 63

The following table describes all the parameters of the Options menu.
Parameter
Decode
ResetStat Decode
Task Decode
MATCH
Decode>
Match>
(only if Decode>
Option
Task=
Match)
Speed Decode
StartPos Decode>
Match
(only if Decode>
Task=Match and
Decode> Match>
Option>
Match= Position)
Length
Decode>
Match
(only if Decode>
Task=Match and
Decode> Match>
Option>
Match= Position)
Separator
Decode>
Match
(only if Decode>
Task=Match and
Decode> Match>
Option>
Match=ID)
ID Decode>
Match
(only if Decode>
Task=Match and
Decode> Match>
Option>
Match=ID)
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Path Possible
Values
-
Read
Match
Verify
All
Position
ID
High
Medium
Low
>=1
>=1
ASCII
characters
ASCII
characters
Default setting
- Resets all the statistical information
(identical parameter to ResetStat in
the RUN menu)
READ Here, you set the task you want to
execute with VS 130-2/VS 130-2vcr:
•
Read: Read codes
•
Match: Compare the entire code
or parts of it with a trained code
•
Verify: The quality values of the
currently read code to which the
quality codes of a trained code
relate
•
All All: All the characters of the
codes are compared with all the
characters of the trained code.
•
Position: The string resulting
from "StartPos" and "Length" is
compared.
•
ID : The string resulting from
"Separator" and "ID" is
compared.
Low Here, you specify the processing
method and duration of decoding.
1 The first character from the
reference string is entered here.
1 The length of the reference string is
entered here.
+ The substring extends as far as the
first separator from the "Separators"
input box to occur or to the end of
the code if there are no separators
from the "Separators" box.
- Here, you enter the Match ID with
which the part string will be started.
Operator Input
Meaning
5-19