Siemens SIMATIC Vision Sensor VS 130-2 Manual page 67

Parameter
Use ROI Extras>
Light
(only if Exposure=
Auto)
ShuttOff Extras>
Light
(only if Exposure=
Auto)
Multicode Extras
Set 1, ... Extras>
Set 14 Codesets
(only if Multicode=
On)
Use ROI Extras>
SpeedUp
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Path Possible
Values
On, Off
On, Off
On, Off
Multiple
selection of
codes 1 to 14
(maximum 5)
On, Off
Default setting
•
Off On: In automatic shutter control,
to calculate the optimum lighting
parameters, not the entire image
area but only the selected
region of interest is used.
•
Off: In automatic shutter control,
to calculate the optimum lighting
parameters, the entire image
area is used.
On ShuttOff-Flag:
•
On: The automatically
calculated shutter speed is
corrected by the ShuttOff value.
•
Off: . The automatically
calculated shutter speed is not
corrected.
•
Off On: Mode in which several
images are captured and
processed per trigger. You
specify how many images are
captured and the trained codes
with which they are compared
using the "Code sets"
parameter.
•
Off: Mode in which exactly one
image is captured and
processed per trigger.
Code set n From the currently active code set,
contains only the processing unit takes the
code n information on the settings for
acquiring the images on the first
trigger and the trained codes with
which they will be compared. (If a
code set contains n images, n
images will be acquired in
succession.)
Note: At each further trigger, the
processing unit starts at the image of
the code that was last read
successfully. If no code can be read,
the current decoding order is
maintained.
•
Off On: During image processing,
the processing unit does not use
the entire image area but only
the selected region of interest
(ROI).
•
Off: During image processing,
the processing unit uses the
entire image area
Operator Input
Meaning
5-23