Adjust Sensor - Siemens SIMATIC Vision Sensor VS 130-2 Manual

5.3.3

Adjust Sensor

In this dialog, you make the settings for the correct adjustment of the sensor head.
Instructions
At the top left of the dialog, a static text is displayed providing brief instructions on
adjusting the sensor.
Current image
If "Recognition" is set, the status of image recognition is displayed:
•
"Successfully finished" in blue text if the currently read code could be decoded
Only the images that the VS 130-2/VS130-2vc is attempting to process are
displayed. The images are displayed with a green border (indicates detected
code). The results box, the display of the minimum dot distance, and the boxes
with the five poorest quality characteristics are enabled. The last image
process and the results string remain displayed until the processing unit sends
the next results string or the recognition status changes to "Running".
•
"Running" in red text if the currently read code could not be decoded at the first
attempt. In this case, VS 130-2/VS 130-2vcr makes further attempts to decode
(relearn). The images are displayed without a border. The results box, the
display of the minimum dot distance, the boxes with the five poorest quality
characteristics, and the corresponding labels are grayed out.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-31