Siemens SIMATIC Vision Sensor VS 130-2 Manual page 58

Operator Input
Parameter Path
Timeout Ports>
TCP/RS-232
IPAddress Ports>
Arch/MMI
(only for
VS 130-2)
Port Ports>
Arch/MMI
(only for
VS 130-2)
Timeout Ports>
Arch/MMI
(only for
VS 130-2)
5-14
Possible Default setting
Values
0 to 3600 0
xxx.xxx.xxx.xxx 192.168.000.045 IP address of the server for
(xxx=0 to 255)
Device-specific 8765
0 to 3600 10
Meaning
•
0: There is no transfer of cyclic
monitoring frames to determine
whether the connection still
exists between the processing
unit and the Ethernet RS-232
converter or the PC/PG on
which a TCP server runs.
•
Otherwise: Time in seconds
after which a monitoring frame is
sent to determine whether the
connection still exists between
the processing unit and the
Ethernet RS-232 converter or
the PC/PG on which a TCP
server runs. The check is
implemented by sending the
"Idling string" ("Connections"
dialog "Part 3/3. Result and
String") to the recipient at the
intervals set with the parameter.
If the check fails, an error is
output (only when the
processing unit is in RUN or
Train) and the connection is
reestablished.
diagnostic information
Corresponding port of this server
•
0: There is no transfer of cyclic
monitoring frames to check the
connection between processing
unit and server.
•
Otherwise: Time in seconds
after which a monitoring frame is
sent to check the connection
between processing unit and
server. If the server does not
respond to this frame within the
monitoring time, an error is
output (only when the
processing unit is in RUN or
Train) and the connection is
reestablished.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01