Siemens SIMATIC Vision Sensor VS 130-2 Manual page 85

Part 2/5: Lighting & Acquisition.
In the "Lighting" group box, you set the type of lamp you are using.
In the "Acquisition" group box, you enter the type of lighting control and set the
exposure time, the brightness, the light source and, if necessary, the shutter speed
offset. You will find further information in the online help that you can call with the
"Help" button.
Part 3/5: Security
In this tab, the administrator must also specify which user is permitted to execute
which tasks and can, when necessary, change the passwords of the users.
Users can also log on under their names with the appropriate password. Below the
"User" table, you can see the role for which you are currently logged on. In the "Log
on" group box, you can change this role by selecting a role from the "User" drop-
down list box and logging on with the correct password.
Part 4/5: Diagn. & Monitoring
In this tab, you specify the information to be stored for diagnostic purposes.
In "Image" in the "Logging" group box, you specify which pictures will be stored and
in which form on the processing unit. In "Report", you specify the form in which
diagnostic events will be stored on the processing unit.
In the "Time base" group box, you specify whether the time stamp of the diagnostic
events is provided by the PC or by an SNTP server of the network. If you select
SNTP as the source, you must also specify the IP address of the server.
In the "Monitoring" group box, you specify whether a live image is displayed in
processing mode.
In the "Persistence" group box, you specify which diagnostic information you want
to store permanently on the EPROM.
If the "Save NOK image" check box is enabled, the image of the next NOK signal is
stored. If an image is already stored, it is overwritten when this function is selected.
If the "Save diag. entries" check box is enabled, the number of diagnostic entries
you specify in the input box will be entered in the EPROM. Existing entries are
deleted when you switch over to On. If the diagnostic buffer in the EPROM reaches
the number of permanently storable diagnostic data records, no further entries are
made.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-41