Siemens SIMATIC Vision Sensor VS 130-2 Manual page 65

Parameter
MaxBright
LIGHT
(only when
Exposure=
Auto)
ShuttOff
LIGHT
(for VS 130-2vcr:
only when
Exposure=
Auto
for VS 130-2:
only when
Exposure=
Auto and ShuttOff-
Flag= On)
Diagnostics
Buffer Diagnose>
Logging>
Images
Reasons Diagnose>
Logging>
Images
Record Diagnose>
Logging>
Images
Save Next Diagnose>
(only for Logging>
VS 130-2) Images
Buffer Diagnose>
Logging>
Report
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Path Possible
Values
10 to 500
-10000 to
10000 µs
Ring, Stack
Trigger, NOK,
Read, Match,
No Match,
Train
Image, +/- 1
Image
On, Off
Ring, Stack
Default setting
500 Upper limit for the brightness
0 µs Enter the value here by which the
automatically calculated shutter time
will be changed.
Note: The maximum exposure time
is not exceeded.
•
Ring Type of image buffer:·
•
Ring: When the buffer contains
50 entries, entries 1,2 ... are
overwritten.
•
Stack: When the buffer contains
50 entries, no further entries are
made.
N_OK, Read und Here, you specify what causes an
Train image to be saved.
•
Image Image: If one or more of the
causes listed above occurs, the
current image is saved.
•
+/- 1 Image: Not only the current
image but also the previous and
next image are saved.
•
Off On: The image belonging to the
next NOK event is saved
permanently in the EPROM.
•
Ring Ring: When the diagnostic
buffer contains 15000 entries,
entries 1,2 ... are overwritten.
•
Stack: When the diagnostic
buffer contains 15000 entries,
no further entries are made.
Operator Input
Meaning
5-21