Siemens SIMATIC Vision Sensor VS 130-2 Manual page 57

Parameter Path
Swap Ports>PNIO
(not active, if
IP Mode =
PNIO)
(only for
VS 130-2)
IP mode Ports>Ethernet DHCP
IPAddress Ports>Ethernet xxx.xxx.xxx.xxx
(not
modifiable, if
IP Mode =
DHCP)
IP Mask Ports>Ethernet 255.255.xxx.yyy 255.255.255.0
(not active, if
IP Mode =
DHCP)
Gateway Ports>Ethernet xxx.xxx.xxx.xxx
(not active, if
IP Mode =
DHCP)
MAC Info Ports>Ethernet Cannot be
IPAddress Ports>
TCP/RS-232
IP Port Ports>
TCP/RS-232
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Possible Default setting
Values
S7 S7
no
DHCP
Manual
DHCPSERV
PNIO (only for
VS 130-2)
192.168.0.42
(xxx=0 to 255)
192.168.000.255 IP Address: IP address of the
(xxx=0 to 255)
Device-
modified dependent
xxx.xxx.xxx.xxx 192.168.000.043 IP address of the Ethernet RS-232
(xxx=0 to 255)
device-specific 8000
Operator Input
Meaning
Specifies the byte order for data
types with a width of 16 bits or more:
•
S7: big endian
•
No: little endian
Assignment of the IP address to the
processing unit in the network:
•
DHCP: Automatic (DHCP =
Dynamic Host Configuration
Protocol)
•
Manual: Manual
•
DHCPSERV: The processing
unit can assign an IP address to
a PC connected by a crossover
cable if the PC obtains its IP
address automatically (DHCP
client).
•
PNIO: Automatic by the I/O
controller
IP address of the processing unit
(An IP address consists of four
numbers separated by periods with
each number being in a range from 0
to 255.)
The subnet mask indicates which
part of the IP address specifies the
network and which part specifies the
processing unit:
For xxx.yyy, binary requires that the
left part be made up of ones without
a gap and the right part be made up
of zeros without a gap. Example:
11111111.10100000 is not
permitted.
Note also: yyy <= 254
network node that can establish
connections outside of the current
subnet
The MAC address (Media Access
Control) is the hardware address of
each network device and is used to
identify the device uniquely in the
network.
converter or of the PC/PG on which
a TCP server runs.
RS-232 port of the Ethernet RS-232
converter or IP port of the PC/PG on
which a TCP server runs
5-13