Standards And Approvals - Siemens SIMATIC Vision Sensor VS 130-2 Manual

Appendix
8.2

Standards and Approvals

IEC 61131-2
SIMATIC VS 130-2/VS 130-2vcr meets the requirements and criteria of the
standard IEC 61131-2.
CE marking
SIMATIC VS 130-2/VS 130-2vcr meets the requirements and aims of the EU
directive listed below.
89/336/EEC "Electromagnetic Compatibility" (EMC Directive)
The EU conformity certificates are available for the relevant authorities and are
kept at the following address:
Siemens corporation
Automation and Drives
Factory Automation Sensors
P.O. Box 4848, D-90327 Nuremberg, Germany
http://www.siemens.com/fas
EMC Guidelines
SIMATIC VS 130-2/VS 130-2vcr is intended for use in an industrial environment.
Area of Application
Industry
Marks for Australia and New Zealand
SIMATIC VS 130-2/VS 130-2vcr meets the requirements of the standard
AS/NZS 2064 (Class A).
Note the installation guidelines
SIMATIC VS 130-2/VS 130-2vcr is "enclosed equipment" complying with
IEC 61131-2".
The installation guidelines and safety notices specified in the documentation must
be adhered to during commissioning and operation.
8-6
Emitted interference
EN 61000-6-4 : 2001
Requirements
Immunity to interference
EN 61000-6-2 : 2001
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01