Improvement Of Print Quality - Brother GTX-4 Service Manual

Improvement of print quality

4
This chapter describes the way to solve the problems of printing quality.
CAUTION
This printer should only be used by operators who are appropriately trained in its safe operation.
Ensure there is adequate space left in front of the printer and avoid placing any objects. The platen moves
forward while operating and it can strike/damage anything set in its path of
movement.
Do not handle the platen while printing. If your hand gets caught between the platen or the T-shirt tray and
the covers, it may be injured.
Wait at least 1 minute after turning off the power switch before opening the front cover. Contact with heat sink
located at the top of the head may lead to a burn injury.
Be careful not to get your fingers caught when closing the front cover,
otherwise it may result in injury to your fingers.
Do not move the platen by hand. Otherwise the printer may be mechanically and electrically damaged.
Do not put your hands inside the covers while the printer's power is turned on. Otherwise your hands may
touch against moving parts and this may result in injury.
4-1