Brother GTX-4 Service Manual page 467

SAFETY INSTRUCTIONS
WARNING
Printing
Keep your finger or any body part away from the
rotating fan. Otherwise it will be caught up, which
results in injuries.
Turn off the power when you approach the fan.
CAUTION
Environmental requirements
Use the printer in a place which is adequately
ventilated. A slight odor is generated when the
printed articles are being fixed by heat.
Installation
Setting up and moving of the printer should only be
carried out by a qualified technician.
The printer machine weighs 120 kg (265 lb).
Transporting and setting up of the printer should
be held in the proper way. Otherwise it may fall
down and cause injury.
When the printer falls down, disconnect the power
cord and contact the place of purchase or a
qualified technician. If you continue to use it, it may
result in fire or electric shocks or poor printing
quality.
iii
Do not place the printer on a shaky table or high
shelf or other unstable location. Otherwise it may
tip over or fall down and cause injury. Furthermore,
the table that supports the printer should be at
least 35.4 in. (90 cm) in width and 23.6 in. (60 cm)
in depth, and should be able to bear a weight of
150 kg (330 lb) or more.
Do not set up the printer in a place where it will be
affected by vibration. Otherwise the printing quality
may be degraded or the printer may fall down,
which causes injury or results in failure of the
printer.
Do not connect the power cord until installation is
complete. The printer may operate if the power is
turned on by mistake, which could result in injury.
Do not climb onto the printer or place heavy
objects on top of it. Otherwise it may become
unbalanced and tip over or fall down and cause
injury.
Be careful not to touch the claws of the mounting
portion on the upper side of the rear cover.
Otherwise you may be injured.
Printing
This printer should only be used by operators who
are appropriately trained in its safe operation.