Brother GTX-4 Service Manual page 449

Error Error message
6010 [PC Data Error]
6011 [Machine Error]
6012 [Machine Error]
6021 [No Battery]
6031 [Machine Error]
6032 [Machine Error]
6033 [Machine Error]
6034 [Machine Error]
6035 [Machine Error]
6036 [Machine Error]
6037 [Machine Error]
6038 [Machine Error]
6039 [Machine Error]
6101 [Machine Error]
Description
The main circuit board has
failed in EEPROM writing.
The main circuit board has
failed in flush ROM erasing.
The main circuit board has
failed in flush ROM writing.
The built-in clock (real time
clock) of the main circuit
board has run out of battery.
A panel button was pressed
when in activation (Platen
button).
A panel button was pressed
when in activation (Print
button).
A panel button was pressed
when in activation (Cancel
button).
A panel button was pressed
when in activation (Back
button).
A panel button was pressed
when in activation (OK
button).
A panel button was pressed
when in activation (Down
button).
A panel button was pressed
when in activation (Up
button).
A panel button was pressed
when in activation
(H-Cleaning button).
A panel button was pressed
when in activation (menu/OK
button).
The carriage is busy.
8-32
Remedy
Items to be checked:
(1) Check to see if there are strong
noise-generating object(s) in the surroundings.
(2) Reactivate the GTX to check to see if such
error occurs.
Electric components as candidate for replacement:
Main circuit board
Replace the lithium battery of the main circuit
board.
Items to be checked:
(1) Check to see if there is something on the
operation panel or some of the buttons are
corrupted.
Electric components as candidate for replacement:
Panel circuit board and Panel control circuit board
(1) After reactivating the GTX, wait and see the
situation if it operates without any error.
(2) There is a possibility that this error occurred
collaterally after any other error had occurred.
Acquire the log file and use the GTX4 Service Tool
(View the DataLog -> Check Operation) to check
to see if another error occurs before or after this
error log.
Error code list