Brother GTX-4 Service Manual page 427

Error Error message
[Maintenance Pouch Set
2204
White12]
[Maintenance Pouch Set
2205
White34]
2214 [Ink Pouch Set White12]
2215 [Ink Pouch Set White34]
[special operational
2300
mode]
[Perform test print (for
2310 white and color) to check
ink discharge from head]
[Perform test print (for
2320 white and color) to check
ink discharge from head]
[PC Communication
3000
Error]
Description
In a scene where an ink
pouch is needed, a
maintenance solution pouch
is set to the white 12
cartridge.
In a scene where an ink
pouch is needed, a
maintenance solution pouch
is set to the white 34
cartridge.
In a scene where a
maintenance solution pouch
is needed, an ink pouch is set
to the white 12 cartridge.
In a scene where a
maintenance solution pouch
is needed, an ink pouch is set
to the white 34 cartridge.
In the [Setting special work
mode] menu within the
Advanced menu, the mode
remains to be set to the
special work mode.
When cleaning or
replacement of maintenance
parts is performed, make sure
to perform test print to check if
the ink is properly discharged
from the head.
Operation(s) liable to affect
the ink discharge from the
head is/are performed.
The communication data
being sent from the PC to the
GTX is interrupted during the
transmission.
8-10
Remedy
Set an ink pouch to the white 12 cartridge.
Check to see if the same phenomenon occurs
even when using a different white ink pouch.
Set an ink pouch to the white 34 cartridge.
Check to see if the same phenomenon occurs
even when using a different white ink pouch.
Set the maintenance solution pouch to the white
12 cartridge.
Check to see if the same phenomenon occurs
even when using a different white maintenance
solution pouch.
Set the maintenance solution pouch to the white
34 cartridge.
Check to see if the same phenomenon occurs
even when using a different white maintenance
solution pouch.
In the [Setting special work mode] menu within the
Advanced menu, release the special work mode.
Perform test print to check ink charge by following
the on-screen instructions.
Perform test print to check ink charge by following
the on-screen instructions.
(1) Check to see if the USB/LAN cable is properly
connected between the PC and the GTX.
(2) Check to see if the tools and application
software used in the PC are properly activated and
operated.
(3) Reactivate both the PC and GTX to redo the
operation.
Error code list