Brother GTX-4 Service Manual page 248

Hide thumbs Also See for GTX-4:

Table of Contents

Take out the wiper cleaner from its packing bag, and remove it from its protector.

As soon as it is unpacked, do not leave it as it is and put it in position.

Insert a new wiper cleaner into the printer from above, tip it leftward and put it in place.

First, insert the shaft from above. Then fold it to the left, press the area with the PUSH indication until a clicking sound is

heard, and get the latch into position.

Wiper cleaner

Close the front cover.

Turn on the power.

Dispose of any waste resulting from the replacement in accordance with applicable laws and ordinances.

The head cleaning will be performed to prevent ink from drying up.

Disassembly / Replacement / Adjustment

Wiper cleaner