Brother GTX-4 Service Manual page 315

Hide thumbs Also See for GTX-4:

Table of Contents

Warp the ink level detection plate 2 inward to unlock the latch.

Ink level detection plate 2

Rotate the body 90 degrees with the boss as a fulcrum, take out the ink level detection plate 2 while removing the

Insert cardboards or other thin plates into the left and right gear pressure plates. Warp the rear end of the lid to

detach the ribs so that they can get over the stepped portions of the stopper. Then remove the lid by sliding it in the

direction reverse to the normal direction.

Avoid applying an excessive force when warping the lid. Otherwise, it could be damaged.

Disassembly / Replacement / Adjustment

detection plate 2