Brother GTX-4 Service Manual page 228

Assembly
(1) To perform the assembly, take the reverse procedures to disassembly operation.
(2) Adjust the carriage speed after attaching the cover. While the printer is in standby mode, press
operation panel to bring the menu screen into view.
(3) From the menu, select [Printer Setting] > [CR Speed Adjustment], and press
Select [Start (after cleaning/setup)] and press
(4)
<TIPS>

Wait until the carriage stops moving and the sound of pong is heard.

It takes about 3 minutes to adjust the carriage speed.
.
CR Speed Adjustment
Auto Adjusting
Please Wait
6-37
Disassembly / Replacement / Adjustment
.
on the