Replacement Of Platen Origin Sensor - Brother GTX-4 Service Manual

6-2-22. Replacement of platen origin sensor

Disassembly
(1) With reference to steps (9) and (10) described within "6-2-10. Replacement of panel main unit assy", remove cover
PF.
(2) Remove one screw fixing the sensor holder.
(3) Detach the photo interrupter from the sensor holder.
(4) Detach the photo interrupter from the connector.
(5) Remove the screw fixing the sensor holder.
(6) Detach the photo interrupter from the sensor holder.
(7) Detach the photo interrupter from the connector.
Sensor holder
Assembly
(1) To perform the assembly, take the reverse procedures to disassembly operation.
5
6-192
Disassembly / Replacement / Adjustment
Photo interrupter