Re-Install The Ink - Brother GTX-4 Service Manual

Re-install the ink

Ink should be re-installed when an entrance of air into the print head prevents proper ink-jet operation and remedial
measure cannot improve the condition.
(1) While the printer is in standby mode, press
(2) Press , select [Maintenance] > [Initial Ink Installation], and press
(3) Press to select one of the options; [All Colors], [All Whites], [All Print Heads], [Black], [Yellow Cyan
Magenta], [White-1], or [White-2-4], and press
(4) According to the message displayed on the operation panel, press
Initial ink installation will be operated.
<TIPS>

Estimated time to complete the process is; 15 minutes for [White-1] and [White-2-4], and 10 minutes for [Black] and [Yellow
Cyan Magenta]. After the procedures are completed, the current screen will go back to the standby mode screen.
on the operation panel to bring the menu screen into view.
.
Initial Ink Installation
All Colors
All Whites
All Print Heads
Black
Yellow, Cyan, Magenta
4-16
Improvement of print quality
.
.