Replacement Of Filters Of Print Head On White Side - Brother GTX-4 Service Manual

Hide thumbs Also See for GTX-4:

Table of Contents

6-1-28. Replacement of filters of print head on white side

Select the [Exchange Filter] from the Advanced menu and select the filter to be replaced. Then, turn off the power

following the on-screen prompts.

Please note that the filters should be replaced one by one.

Ink installation should be performed after replacing the filters. If the ink level is low, make a new ink pouch available for use.

Advabced Menu

Exchange Filter

Setting special work mode

Output Check

Print Position Adjust

Remove the four screws fixing the cartridge cover B on the right rear of the main unit to detach it.

Take out the cartridge set at the portion whose filter is to be replaced, replace the white ink pouch with a capping

pouch, and then insert the cartridge into the main unit.

Disassembly / Replacement / Adjustment

Exchange Filter