Download  Print this page

Brother GTX Series Reference Manual

Hide thumbs

Advertisement

Quick Links

COOKBOOK
for
<<<
> A reference guide for all GTX Series users

Advertisement

loading

  Related Manuals for Brother GTX Series

  Summary of Contents for Brother GTX Series

  • Page 1 COOKBOOK <<< > A reference guide for all GTX Series users...
  • Page 2 ENVIRONMENTAL CONDITIONS > Mandatory Temperature & Humidity Requirements : Required to keep the warranty! Temperature & Humidity are recorded in the Log file! TEMPERATURE HUMIDITY ° ° If not enough, please install a humidifier ! Go to the menu: Maintenance >...
  • Page 3 VERY IMPORTANT POWER The Brother GTX should ALWAYS be left with Power ON NEVER shut OFF the printer except if requested by the display informations ! Power is requested to perform the needed recirculation of the inks from time to time...
  • Page 4 DAILY AGITATION OF WHITE INK 1’ 1’ > Perform the procedure shown below if the message "Remove the white ink cartridge and shake it" is displayed before starting operation. For 1 Minute For 1 Minute Take out the white ink cartridge from When the remaining ink level becomes the printer approximately 15 cm, shake the cartridge...
  • Page 5: Adjusting The Height Of The Platen

    BEST PRACTICE FOR PRINTING >>> A MUST! GOOD 3 mm Ink Mist Ink Mist 10 mm > CLOSEST DISTANCE ALWAYS KEEP THE BETWEEN THE PRINTHEADS AND THE SURFACE OF THE GARMENT ! IT IS VERY IMPORTANT FOR THE LONG LIFE OF YOUR PRINTER ADJUSTING THE HEIGHT OF THE PLATEN To provide an optimum printing image quality when a thicker textile is used, you need to adjust the platen's height related to the thickness of the textile.
  • Page 6: Daily Maintenance

    DAILY MAINTENANCE NOZZLE TEST TO BE DONE EVERY WORKING DAY > You have to print a nozzle test for White & CMYK every morning before using the printer. It is the only way to know the status of the nozzles in the machine ! >...
  • Page 7: Weekly Maintenance Procedures

    WEEKLY MAINTENANCE > WEEKLY MAINTENANCE PROCEDURES To achieve a good weekly maintenance you will have to do the following actions: days W E E K L Y M A I N T E N A N C E + Suction Cap Cleaning + Exhaust Cleaning + Wiper Cleaning + Nozzle Guards Cleaning...
  • Page 8: Wiper Cleaning

    Wiper Cleaning > TO BE DONE EVERY WEEK Both white plastic wipers [White & CMYK] should be cleaned on both sides and top with the Cleaning Stick R dipped in Cleaning Solution. Use the tip of the Cleaning Stick R to clean under the teeth of the wiper holder and remove the dried ink Be sure to use the Cleaning stick R...
  • Page 9: Maintenance Parts Exchange

    MAINTENANCE PARTS EXCHANGE > MAINTENANCE PARTS CLEANING & REPLACING PROCEDURES In case of Warning/Error messages please follow the ERROR WARNING following procedures: > Always use this menu to perform cleanings or replace parts : Menu > Maintenance > Maintenance Part Clean/Replace >...
  • Page 10: Additional Weekly Maintenance

    ADDITIONAL WEEKLY MAINTENANCE Visual inspection is important to keep your printer up and run- ning. Verify all the moving parts of the machine and also check for leakage of ink. Please follow also all the instructions that could appear on the display of the printer! key to know what When you see a yellow number push the...
  • Page 11 WHEN NOT USING PRINTER FOR LONG PERIOD OF TIME When the printer will not be used for a prolonged period of time, take appropriate proce- dures before storing the printer depending on storage period or condition. > DO NOT turn the printer OFF, otherwise, the printer may be damaged. >...
  • Page 12 [2 pieces in the box] Fan Filter SB7007001 4,00 € [2 pieces in the box] Cleaning Sticks R SB7008001 65,00 € [50 pieces in the box] NOTES CONTACT DETAILS OF YOUR BROTHER DEALER Company Name: Representative: Email address: Phone number:...