Replacement Of The Flushing Case - Brother GTX-4 Service Manual

Hide thumbs Also See for GTX-4:
Table of Contents

Advertisement

6-1-24. Replacement of the flushing case

Disassembly
(1)
Select the [Output Check] from the Advanced menu and select the [Carriage Test] > [To Center]. Press and hold
down the power button to power off.
<IMPORTANT>
Please complete the task within 30 minutes, in order to prevent the print heads from drying up.
Long-hour continuation of a head without capping may lead to non-ejection of ink-jet droplets.
Advabced Menu
Exchange Filter
Setting special work mode
Output Check
Input Check
Print Position Adjust
Carriage Test
To Cap Position
To Flushing Position
To Center
(2)
Remove the flushing case from the maintenance unit.
<IMPORTANT>
Ink droplets will drop off from the hole on the bottom of flushing case. Press waste cloth against the bottom surface, and lift
the flushing case vertically to remove.
OK
Flushing case
6-69
Disassembly / Replacement / Adjustment
Output Check
Wiper Test
Carriage Test
Solenoid Test

Advertisement

Table of Contents
loading

Table of Contents