Replacing The Wiper Cleaner Sensor; Assembly Of Wiper Cleaner Sensor - Brother GTX-4 Service Manual
Hide thumbs
Also See for GTX-4:
- Instruction manual (18 pages) ,
- Instruction manual (320 pages) ,
- Setup manual (37 pages)
Table of Contents
Advertisement
Replacing the wiper cleaner sensor
(1)
Turn the cleaner cam by hand to align the cam notch to the sensor part.
(2)
Loosen the screw fixing the sensor circuit board.
(3)
Detach the sensor circuit board.
1
Assembly of wiper cleaner sensor
(1)
To perform the assembly, take the reverse procedures to disassembly operation.
Connect to Maintenance circuit board CN24
Connect to
Maintenance
circuit board CN1
Disassembly / Replacement / Adjustment
2
6-203
Advertisement
Table of Contents
