Connect With Usb2.0 Cable - Brother GTX-4 Service Manual

2-4-2. Connect with USB2.0 cable

(1) After installation of the printer driver is completed as explained in "2-4-1. Installing printer driver onto your PC",
connect the PC and the printer via a USB 2.0 cable with the printer power on.
<TIPS>

For this connection of the USB cable, secure it in place by means of the cable clamp as required.
(2) When the driver software installation window is displayed, click [Skip obtaining driver software from Windows
Update], and select [Yes] on the next screen.
The installation procedures will be automatically performed, and the relevant information is displayed on the lower right area of
the PC screen.
<TIPS>

This screen may prompt more than once.

And this also may require several minutes to complete.
(3) After the installation is completed, open the [Devices and Printers] from [Control Panel].
<TIPS>

In the case of Windows 8.1, select the [View devices and printers] from [Control Panel].

In the case of Windows 10, select [Settings] -> [Device] -> [Devices and Printers].
2-10
Installation and preparation