Brother GTX-4 Service Manual page 280

Hide thumbs Also See for GTX-4:

Table of Contents

If there is a spout spring, remove the spout spring by releasing the latch and sliding the spout spring in the

arrow-pointed direction.

The spout spring can be reused.

To perform the assembly, take the reverse procedures to disassembly operation.

The tube, comprised of several parts, is required to be assembled.

Insert the needle tube assy into the solenoid valve.

Insert the tube fully up to its base while taking care not to bend it.

Apply maintenance solution or cleaning solution to the tube before insertion.

Insert the tube up to its base.

Disassembly / Replacement / Adjustment